Welcome to the Strelets Forum.
Please feel free to discuss any aspect of 1/72 scale plastic figures, not simply Strelets.
If you have any questions about our products then we will answer them here.
Not sure of your point. Design changes, mods or variants take your pick eg angled roofs, curved roofs as in this one. Yes I know all that you mention as I have the gen in Zaloga and Grandsen. "as in the case of the Austin there were several body variants which differed in minor details" op cit I have basically taken that not made it up save your No for them.
Several chassis looked similar eg Putilov Packard or the Izhorskiy White( yes not made by Putilov I assumed you knew this ditto Fiat).
The White was a touring car so had a shorter length (like the Strelets drawings) but looked superficially like the Putilov Austin
My point, which I should have made clearer, was there were lots of similar looking vehicles and this Strelets one could either be one of them by design or accident.It could also be to make possible the half track variant, mod, design change, type that compromises were made in the model to get the most from the tooling (as with the guns).
Not sure of your last paragraph. They are not distorted but the wrong proportions or wrong data- eg spokes or leaf, springs, wheels. Issuing wrong or erroneous or slightly distorted drawings would seem a strange policy. There are plenty of accurate drawings and 3d models of these vehicles already in existence. I would presume a competing manufacturer would use those or measure up the real thing. I think the only people fooled would be those who do not have scale plans - I have some.
Yes, there were "several" Austin that Russia used (in WW1, the RCW, and the Russo-polish War) five to be precise: Series 1, Series 2, Series 3, Austin-Putilov, and Austin-Putilov-Kegresse. It makes it clearer when you say some people think that many Russian armoured cars look similar (I don't think so, but I can see how some people might get them mixed up).
My last paragraph was really about a point I mentioned in my first post and one which you also mentioned - that the body seems too high. It seems to my eyes that in the side views the vehicle is too short and too tall, and the side views do not match up to the plan view (in the plan view, you could not draw a straight line from side to side between the turrets, but in the side view you can see straight through). It just looks as if the pic has been squashed from side to side, whereas the plan view hasn't. That's in addition to the other detail errors.
Considering Strelets' WW1 guns are accurate but simplified, I am surprised that this Austin Putilov is not the same, ie simplified but accurate. I just hope it's not too late to make a few tweaks to the 3D Computer model. I'm not interested in demonstrating any "expert" knowledge of early armoured cars, I just want a good, plastic model of the Austin Putilov. Maybe I'll super-detail it when it comes out, or add Kegresse tracks, but if it's too inaccurate (like LW's Russo-Balt for example) I won't be so keen.
I got the Milsom Profile of Russian Armoured Cars to 1945 back in 1970 and I always fancied scratch building this vehicle though I didn't have any plans. When I did get some plans (via Zaloga and MM mags) the rivets and the wheels put me off. Scarborough's Airfix guide to Armoured Car Modelling gave my ideas a boost but still the rivets seemed like a drudge too many.
A model that is overall dimensionally correct and has good wheels and has adequate rivet detail is what I am looking for. Door handles, hinges, drive shafts etc I can make with plastic strip or rod or brass. Accurate semi elliptical leaf springs are easy to make with plastic strip. This is a fairly small model after all.
This web site of the Kubinka Museum's Putilov has a good walk round
and to 45 onwards
The side view pic 3055 is almost a perfect side elevation
The tyres are of course not authentic
The Putilov rivets are quite close to edges of the armour plates but they may look OK when scaled down on the model.
I hope the drawings are revised.
Just had time to edit
The Kegresse side view matches well with the pic 3055 referred to above. I did an overlay using Photoshop also did an overlay with the Strelets side view on both and unfortunately it confirmed my doubts.