Welcome to the Strelets Forum. Please feel free to discuss any aspect of 1/72 scale plastic figures, not simply Strelets. If you have any questions about our products then we will answer them here.
Give them a good wash in washing up liquid/detergent, let them get dry naturally , use a plastic primer, once dry , use the blue of your choice, key if you want it to stand up to handling , varnish ,gloss , and matt to finish, if you don`t like the glossy toy soldier look.
Give them a good wash in washing up liquid/detergent, let them get dry naturally , use a plastic primer, once dry , use the blue of your choice, key if you want it to stand up to handling , varnish ,gloss , and matt to finish, if you don`t like the glossy toy soldier look.
Thank you so much, Alan! I recall your FFL in your fort. I really enjoyed the Legionnaires relaxing and having a meal. I wish I could find the Contributions, but the S*R site appears to be on hold for a while.
May I ask, please, Alan, what brands of paints to you like best? The last time I painted some figures was back in about 1989 and there are now so many new brands to choose from.
I am quite open minded with paints, Humbrol is my usual choice for oil based, Wargames foundry, Citadel ,Vallejo to name but three acrylics , they are all pretty good.
I agree good wash in detergent.
I use a matte primer from Halfords as it’s cheaper and sticks very well to both metal and plastic miniatures.
I personally use a lot of citadel paints as they are easily available in the UK. They’ve seemed to stand up to the kid’s handling them also. They also do a contrast range which may appeal, there are plenty of videos on YouTube about them.
I believe they also do undercoat sprays in certain colours but I believe they are a bit pricey.
I also agree with the gloss followed by matte varnish but I haven’t done that to any of mine as of yet and the paint still holds.
Hope this helps. Happy painting
A small, but important point that I'd suggest in addition to Alan's and Jimmy's suggestion for a good wash is a good rinse afterwards. I triple rinse mine afterwards, in warm and/or cool water, to be sure to remove any residual detergent. I find it crucial prior to undercoating, particularly as I use acrylic paint.
The old trick of mixing a bit of PVA glue with your paint may be a good idea in your case. Just a little bit applied as a wash before the undercoat or with the undercoat. You don't want it to become gluggy!